Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Crucial factors affecting the physicochemical properties of sol–gel produced Fe3O4@SiO2–NH2 core–shell nanomaterials

Multifunctional nanomaterials with task-specific physicochemical properties, especially core?Cshell nanostructures with Fe₃O₄ core and NH₂-functional shells (Fe₃O₄@SiO₂?CNH₂), have been extensively investigated as high-performance adsorbents, catalysts and catalyst supports; and in most cases the controllable sol?Cgel technique is the choice for fabrication of this kind of widely applied materials. Herein, we demonstrated that mono-dispersed and spherical Fe₃O₄@SiO₂?CNH₂ nanomaterials with magnetic response core, NH₂-functional shell structure can be facilely prepared by co-condensation of TEOS with APTMS using a versatile sol?Cgel process. It was shown that the proper usage of APTMS and appropriate pre-hydrolysis time of TEOS were crucial and key steps for formation of highly uniform and desirable amino loading Fe₃O₄@SiO₂?CNH₂ materials. The TEOS pre-hydrolysis and the critical time (around 90?min) before the addition of APTMS prove to be vital for uniform structure evolution, while the appropriate concentration of APTMS (~2.28?mmol?L^?1 in our system) leads to well-dispersed materials with relatively high loading of amino functionality. The as-prepared Fe₃O₄@SiO₂?CNH₂ magnetic nanoparticles prepared under optimum conditions possessing superparamagnetic behavior, uniform core?Cshell structure (~200?nm in diameter), relatively large BET surface area (~138?m²/g) and high incorporation of amino-functionality (~2.90?wt?%).     

Energy transfer channels at the diffraction-anomaly in transparent gratings and applications in sensors

Diffraction anomaly corresponds to an energy re-distribution in the reflected and transmitted light beams and in different diffraction orders of a grating, which leads to sharp modulations on the transmission and reflection spectra. In gratings sitting on a transparent substrate, this portion of the energy is actually transferred to channels separated from the reflected and transmitted beams. These channels are based on multiple degenerated diffraction processes at the same wavelength as the diffraction anomaly. The spectroscopic response of these channels is sensitive to the change in the environmental refractive index and can be utilized in sensor devices.     

A Porphyrin-Based Covalent Organic Framework for Metal-Free Photocatalytic Aerobic Oxidative Coupling of Amines

Imines are important intermediates in drug synthesis. Photocatalytic aerobic oxidative coupling of amines has been considered as a clean and promising way to produce imines and has attracted great attention. Herein, we designed and synthesized a novel two-dimensional porphyrin-based covalent organic framework (Por-BC-COF) which adopts an AA stacking mode with excellent crystallinity, high Brunauer–Emmett–Teller surface areas (1200 m² g⁻¹), wide light absorption range (200–1300 nm) and good stability in a variety of organic solvents. Por-BC-COF can be used as a metal-free heterogeneous photocatalyst for the photocatalytic oxidation of amines to imines under visible light and red light with a high yield (97 %). This work presents a novel and efficient COF photocatalyst in the application of light-driven organic synthesis.     

A 2-dimensional gradual period photonic heterostructure possessing omnidirectional band gap in visible range made by holography

A 2-dimensional gradual period photonic heterostructure was made with holography by use of non-uniform swelling effect of dichromated gelatin during processing. In this structure, the symmetric point group of triangle lattice was debased to C_2V from C_6V. Theoretical analysis and experimental results show that omnidirectional band gap in visible range can be achieved with this kind of heterostructure made by low refractive index materials.     

Physical,hydrochemical and isotopic characteristics of springs in Beijing,China, compared to historical properties

A physical, hydrochemical and isotopic evaluation of springs in Beijing was conducted in 2009 to reveal apparent changes in the properties of those springs. The results showed that most of the 2nd class springs and more than 50 % of the 1st class springs recorded in the early 1980s were depleted, while the discharges of existing springs have also decreased sharply. In addition, the majority of springs were of the HCO₃–Ca–Mg type and good water quality, with the quality indices changing slightly compared to those recorded 30 years ago. The abundances of ²H, ¹⁸O, and ³H in the springs indicated that most of the springs were of meteoric origin with a relatively close connection to modern atmospheric precipitation. As a result, the springs have a relatively strong renewability within a shallow circulation.     

Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.